Scent Tower FAQ

ON

Power on the diffuser.

OFF

Power off the diffuser and press and hold for 5 seconds to reset the device to the factory default settings.

LOW

Diffusing for 10 seconds and pausing for 4 minutes.

MED

Diffusing for 20 seconds and pausing for 2 minutes.

HIGH

Diffusing for 25 seconds and pausing for 60 seconds.

2H

Indicates the diffuser will work for 2 hours.

4H

Indicates the diffuser will work for 4 hours.

8H

Indicates the diffuser will work for 8 hours.

12H

Indicates the diffuser will work for 12 hours.

LED Light mode control:

Mode 1: Light on only when diffusing

Mode 2: Always on

Mode 3: Awalys off

1

Pour 1/4-inch of rubbing alcohol into the clean, empty fragrance bottle that came with your Scent Tower.

2

Screw bottle with rubbing alcohol into the Scent Tower.

3

Run the Scent Tower for 15 minutes to ensure alcohol filters through the entire device.

4

To remove oil stains and fingerprints from the Scent Tower, unplug device from outlet and keep in an upright position. Wipe with a clean, damp cloth. Avoid using harsh or abrasive cleaning products.

5

Remove bottle that contained rubbing alcohol. Rinse, dry, and set aside for next cleaning. Attach new fragrance oil bottle to upper part as directed, reconnect with device, and plug back into wall outlet to begin next use.

1

To change the nozzle, unplug the diffuser, remove the bottle of oil, and carefully pull out the clear tube. Gently pull out the black nozzle by wiggling it gently using a pair of tweezers.

2

Replace it with a new nozzle and ensure the nozzle is pressed very firmly into the top of the diffuser.The tube can be reinserted into the nozzle. It is very important that you put the tube into the correct opening of the nozzle otherwise the nozzle there is a small round tube holder that the tube needs to be firmly secured into.

1

Do not not tilt the diffuser as oil can spill inside the device and damage the mechanics.

2

Use the scent diffuser and fragrance oils requires adult supervision.

3

Do not wet the device or place it near any liquids, sinks, bathtubs, or outdoors.

4

Do not use the device with any power cord other than the one provided with your diffuser. Position the power cord to prevent it from being a tripping hazard. Before connecting your diffuser to a power outlet, check that the voltage label specified on the adapter is the same as the power supply.

5

Do not run the unit on empty. Unless there is oil in the bottle or alcohol for cleaning, turn the device off.

6

Do not ingest any fragrance oil or apply them to any part of the skin. Keep oils out of contact with eyes, ears, nose, mouth, and any other bodily opening. If contact does occur, flush with water immediately until all traces of oil have been removed entirely from the area.

Oil leaking

Bottle is loose. Screw it improperly and straight;

Seal is broken or missing. Replace the supplied seal that came with the machine.

No diffuse

Check if the power is ON or OFF; The pump is damaged and needs replacing. lf there is no diffusion or it is weak, replace the oil with rubbing alcohol and run it through the machine for 5minutes.

Little or no spray coming out

Atomization head is blocked. Clean diffuser by running rubbing alcohol through it or replace diffuser core. Diffuser core with straw is missing or damaged. Replace with a new one.

Pump is damaged and may need replacing.

Diffuser spraying liquid

Diffuser core is damaged, replace diffuser core. If machine is tilted or angled, make sure it’s upright at all times.

Model No.

A9

Dimensions

3.3” R X 10.2” H / 84 X 260mm

Net Weight

1.74lbs / 790g

Voltage

5V / 2A

Power

8W

Battery

4000mAh

Coverage

up to 850 SQ.FT / 200m3

Bottle

100ml

Material

Aluminum